SIMPLE TECNOPANEL (TPR/TPN/TPC/TPF)

The simple panel is the most versatile and offers various areas of application:
- TPR (RESISTANT TECNOPANEL). This type of panel is applied for load-bearing structures with micro-concrete applied to both surfaces.
- TPN (NORMAL TECNOPANEL). Is applied as vertical walls on exterior facades and dividing walls both in new and renovated buildings built completely using the system.
- TPC (WALL TECNOPANEL). Used as vertical wall both exterior and interior in buildings with pre-existing structures.
- TPF (FLOORING TECNOPANEL). Used as a resistant and thermo-insulating structural element for floors and roofs of up to 6m span.

UNIDIRECTIONAL TECNOPANEL (TPU)

For constructing large span floors. Allow for inclusion of additional steel bars in a prepared space to be later concreted on site in the traditional manner. It is very similar to a traditional meshed unidirectional floor.
In the photo: panel with additional reinforcement

DOUBLE TECNOPANEL (TPD)

This is composed of two simple panels, suitably shaped and joined together using horizontal connectors and results in a hollow floor panel to be filled with concrete of suitable characteristics and resistance, which will depend on the structural requirements. It is used basically for large scale land retention.

STAIRWAY TECNOPANEL

Is made up of a block of expanded polystyrene, cut and shaped according to the project design and covered with two shaped steel meshes joined together with electro-soldered connectors. This panel, once suitably reinforced and completed with concrete in the built-in conduits, is then ready for use in stretches of stairway of up to 6 metres free span. The stairway panel is characterized by its easy and rapid installation together with its unique lightness and high resistance.

LANDING TECNOPANEL

This is a panel ready-designed to include bi-directional reinforcement for the construction of stairway landings.

REINFORCEMENT MESH

Angular reinforcement mesh (MA)	Flat reinforcement mesh (MP)	U-shaped reinforcement mesh (MU)